For manufacures, we strip paint line rejects, racks and hangers

Equipment rebuilders use our services when re-working pumps, housing, electrical panels, and other parts.

We strip entire auto bodies, frames and other parts for antique car restorers.

Engine blocks, heads and miscellaneous parts are cleaned of all paint, grease, oil, and rust for rebuilder.

Rust Removal Services

Before		After

Metal Finishing Service uses a non-destructive alkaline electro-chemical derusting process. No metal loss or hydrogen embrittlement results, unlike processes using acids or abrasive cleaning. Parts up to 20' feet long and 10 tons can be handled.

For manufacturers, parts rejected by quality control due to rust are derusted.

For engine overhaul shops and equipment rebuilders rust can be removed from both exposed areas and internal passages such as water jackets and heat exchangers.

We are able to derust badly rusted sheet metal parts for car restorers without causing further damage. We even do work for museums.

Metal Cleaning Services

In addition to paint and rust removal, degreasing and electro-cleaning services are offered.

Powder Coating Services

Heavy Equipment Component		Generator Frames

Metal Finishing Services operates a large batch type powder coating system, capable of coating parts up to 24' long and 10 tons in weight. Parts are cleaned and given an iron phosphate treatment prior to coating.

For manufacturers, we specialize in coating large items that conveyorized lines can't handle. For example, we coat heavy equipment components, generator frames and street light poles. Also small to medium quantities of smaller parts are frequently coated. Frequent color changes are not a problem.

We coat HVAC grills, light fixtures, hand rails, auditorium seating, light poles, and many other items for contractors.

Automobile frames, wheel, chassis parts, etc; are coated for restorers.

Electrocoating Services

Metal Finishing Services provides electrocoating (E-Coating) on parts as a primer. This is an immersion process where parts are placed in a bath and an electrical voltage is used to attract the paint to all areas of a part, including inaccessible areas such as the inside of pipes. A black cathodic epoxy coating is used which is identical to the process used by most auto manufacturers. Prior to E-coating a zinc phosphate coating is applied

E-Coating is compatible with any finish coat, including powder coatings or solvent based paints. It provides superior corrosion protection , especially when followed by a powder coat topcoat.

Typical applications include auto bodies , frames and misc. parts, outdoor furniture, oilfield equipment , marine applications and any thing requiring superior corrosion resistance.

E-coating services are provided for manufacturers, auto restorers, equipment rebuilders and others.